finishes for architectural metalwork
Tuscumbia Iron Works Designers & fabricators of architectural metal products
3525 Florence Blvd. Florence, Alabama 35634 (256)248-4926

Because of the variety of monitors and the inability at this time to insure that the colors will look exactly the same on all monitors and when printed on any printer we do not offer a color pallet on line. We are still looking into options. Once an acceptable way of doing this becomes available we will look into integrating it into our site. To view some examples of different finishes on some of our products click on the links at the right. If there is a particular color you are looking for then we can have most PPG, Sherwin Williams, and ICI color numbers matched.

We offer several types of finishes, for iron our standard finish is to remove mill scale and profile the surface, pre prime with zinc, prime with a 2 part epoxy, and finish with a two part urethane.

Our standard finish for aluminum is to profile the surface, prime with a two part epoxy, and finish with a two part urethane.

In addition to our standard finishes some of the other high performance coating systems we offer are:

Fluoropolymer Finishes

Powder Coating with Polyesters, Urethanes, and Epoxy/Polyester Hybrids

We also offer budget priced shop coat primers and alkyd paint finishes on many or our products for our clients who do not require a high performance coating system.